Toray UF Membrane Module | Pressurized Type | HFU-2020AN

We ship to
Please login or register to see downloads

Description

Toray Pressurized UF Membrane Modules

Pressurized Outside to In / Dead-end Filtration Ultrafiltration (UF) Membrane Module

Pressurized type has high surface area and can realize high flux operation, that can achieve smaller footprint UF system and higher cost performance.

Toray’s PVDF membrane construction is highly resistant to chlorine and strong acids, which allows for better cleaning and optimization of filtration flux rates after cleaning. The HFU-2020AN hollow fiber modules effectively remove suspended solids, viruses, and bacteria and are certified for drinking water applications.

The possibility of the filtration of Ground Water, Surface Water, Sewage Secondary Effluent and Seawater allows a wide range of different applications:

  • Drinking Water Production
  • Tertiary Treatment of Sewage Water
  • RO Pretreatment in Seawater Desalination
  • Industrial Water Production
  • Reuse of Industrial Waste Water

Toray’s Pressurized Series have been certified as an acceptable filtration technology for compliance with the following Certificates.

  • AMST (Association of Membrane Separation Technology of Japan)
  • NSF / ANSI / CAN 61
  • NSF / ANSI 419
  • CDPH (California Department of Public Health – Drinking Water Program)
  • KWWA (Korea Water and Wastewater Works Association)

Specifications

Looking for downloads for this product? Follow the two simple steps below.

Step 1
LoginorCreate Account
Step 2

View downloads!

Downloads

Specifications

Manufacturer Toray
Series UF Pressurized HFUG Series
Model Number HFU-2020AN
Part Number HFU-2020AN
Description Toray pressurized Outside to In / Dead-end Filtration Ultrafiltration HFU-2020AM (UF) Membrane Module

Applications
Drinking water
Industrial process water
Pretreatment for seawater RO desalination
Secondary and tertiary wastewater

Membrane Characteristics
Diameter (inch): 8
Membrane Material: PDVF (Polyvinylidene fluoride)
Nominal Pore Size: µm 0.01
Outer Membrane Surface Area: m² (ft²) 72 (775)

Operating Parameters
Maximum Feed Water/filtrate Flow: m³/h (gpm) 12 (53)
Maximum Backwash Flow m³/h (gpm) 13.5 (59)
Maximum Air Flow Nm³/h (scfm) 9.0 (5.3)
Maximum Inlet Pressure kPa (psi) 300 (43.5)
Maximum Backwash Pressure kPa (psi) 300 (43.5)
Normal Operating Transmembrane Pressure kPa (psi) 0–200 (0–29)
Operating Temperature Range °C (°F) 1–40 (34–104)
pH range During Filtration: 1–10
pH Range During Cleaning: 0–12

Dimensions
Diameter: 8.5 in. (216 mm)
Length: 7.087 ft. (2,160 mm)
Weight full of water: 203 lbs (92 kg)
Weight after draining: 108 lbs (49 kg)

Click To Schedule a Service Call

Click To Schedule a Sales Call

Call for a FREE Quote Today

(855) 787-4200