Features and Benefits
Stainless Steel Construction – Proven corrosion resistance and strength. Operating pressure to 150 psig (10.3 bar) at 200° F (93° C).
Side Inlet and Bottom Outlet – Side inlet is located below the level of the filters, providing non-impinging flow. The bottom outlet allows the housing to be drained completely and reduces the installation space required.
Universal Cup and Post Sealing – Provides lower seal for cartridge filters with open-end knife-edge type, 222 O-ring, or 120 O-ring end adapters.
Hold-Down Plate – Provides upper seal for cartridge filters with patented Hytrex* self seal spring, open-end knife-edge seal (when used with optional stainless steel cup and spring adapters).
V-Clamp Closure – Quick and easy cartridge filter replacement reduces labor costs and downtime.
Clamp-On Stainless Steel Stand – An optional floor mounting stand allows adjustment of the housing height and the level of the inlet and outlet. Height can be adjusted so that the outlet is lower than floor level.
Tungsten Inert Gas (TIG) Welding – All TIG welding is done at the factory for the highest quality control.
||7-Round HX Cartridge Filter Housing
||Flow Capacity: < 140 gpm ( 530 Lpm)
Length: 60" (152 cm)
Overall Height required for Cartridge Removal: 88" (224 cm)
Liquid Pressure Rating: 150 psig @ 200° F (10.3 bar @ 93° C)
Housing Material: 316 Stainless Steel
Inlet/Outlet Connections: 2-inch (5.1 cm) MNPT standard [3" (7.62 cm) optional]; Victaulic and flanges optional
Pre- and Post-Filter Gauge Ports: 1/4-inch (0.6 cm) FNPT ports for inlet and outlet pressure gauges
Upstream Vent Port: 1/4-inch (0.6 cm) FNPT
Drain Port: 1/2-inch (1.3 cm) MNPT
O-Ring Material: Buna-N Standard; EPDM, Viton and Teflon encapsulated Viton optional
Cartridge Lengths: 20-, 30-, 40-, or 50-inch filters (51, 76, 102, or 127 cm)
Finish: Satin Finish
Handles: Handles included on 30-, 40-, and 50-inch (76, 102, or 127 cm) housing domes
||81 lbs (37 kg)
Hytrex Filter Housing - # of Cartridges per Housing - Cartridge Length - Inlet/Outlet Size - FNPT Port Type - Housing Material (316ss) - V-Band Clamp Closure
HX - 07 - 20 or 30 or 40 - 2.0 or 3.0 - V=Victaulic - 316 - A
||Part # / Description
1226015 HX07 Accessories Kit (includes clamp-on stand, seven spring-cup fittings and a PVC vent valve)
1162552 HX07 Clamp-on Stand, 316SS
1119540 Spring-cup Fitting, 316SS (necessary for double open end filters, seven required)
1164157 Pressure Gauge, Back Mount, 316SS, ¼ “ MNPT, 0-100 psig (6.9 bar)
1148053 HX07 EPDM Housing Seal
1148055 HX07 Viton Housing Seal
Part # / Spare Parts / Material / # Per Housing
1143002 - Wing Nut - 316SS - 1 or 2
1164157 - 100 psig Pressure Gauge (Back Mount) - 316SS - 1
1110425 - .25" Ball Valve (Vent) - PVC - 1
1143038 - 7-Round Hold Down Plate - 316SS - 1
1119261 - Tie-Rod 20" - 316SS - 1 or 2
1118090 - Tie-Rod 30" - 316SS - 1 or 2
1140866 - Tie-Rod 40" - 316SS - 1 or 2
1142018 - Tie-Rod 50" - 316SS - 1 or 2
1142468 - V Band Clamp, 7-Round - 304SS - 1