Description
The M-Series Ultrafillic* membranes are made of polyacrylonitrile (PAN) polymer. This membrane is characterized by a pore size of 0.01 microns with an approximate molecular weight cut-off of 20K-50K Dalton. To avoid fouling by “free” oils, the MW–series elements have been engineered to be extremely hydrophilic (water attracting) as compared to conventional membranes that are oleophilic (oil attracting).
MW Elements are used for oil/water separation and pretreatment of process water before reverse osmosis or nanofiltration.
Typical Operating Flux 5 – 20 GFD (8 – 34 LMH)
Maximum Operating Pressure 100 psi (700 kPa)
Maximum Temperature For fiberglass elements (1):
Continuous operation: 122°F (50°C)
Clean-In-Place (CIP): 122°F (50°C)
For cage elements: Continuous operation: 176°F (80°C)
Clean-In-Place (CIP): 122°F (50°C)
pH Range Continuous operation: 3-9,
Clean-In-Place (CIP): 2-11 (2)
Maximum Pressure Drop Over an element: 15 psi (103 kPa)
Per housing: 60 psi (414 kPa)
Chlorine Tolerance 200,000 ppm-hours
