Description
FilmTec™ Nanofiltration < 4″ Elements
FilmTec™ Nanofiltration < 4″ Elements allow selective separation of organics and salts for small industrial water treatment plants that produce less than approximately 1 gpm (230 L/h) of permeate.
FilmTec NF270-2540 Elements are ideal for removing a high percentage of TOC and THM precursors with medium to high salt passage and medium hardness passage in commercial systems. The NF270 nanofiltration membrane is an ideal choice for surface water and ground water where good organic removal is desired with partial softening. FilmTec NF270-2540 elements are tape-wrapped.
Uses
- Production of municipal drinking water
Advantages
- Good organic (NOM) removal
- Partial softening preserves water character
- High flux results in high yields
Specifications
Specifications
| Manufacturer |
Filmtec |
| Series |
<4" Nanofiltration |
| Model Number |
NF270-2540 |
| Part Number |
149986 |
| Description |
Typical properties for nf270-2540
Active Area ft² (m²): 28 (2.6)
Applied Pressure psi (bar): 70 (4.8)
Permeate Flow Rate gpd (m³/d): 850 (3.2)
Stabilized Salt Rejection: >97.0%
Dimensions in (mm)
A 40.0 (1,016)
B 1.19 (30)
C 0.75 (19)
D 2.4 (61)
Suggested Operating Conditions
Membrane Type: Polypiperazine Thin-Film Composite
Maximum Operating Temperature: 113°F (45°C)
Maximum Operating Pressure: 600 psi (41 bar)
Maximum Feed Flow Rate: 2540 elements 6 gpm (1.4m³/hr)
Maximum Pressure Drop:
Tape wrapped: 13 psig (0.9 bar)
Fiberglassed: 15 psig (1.0 bar)
pH Range, Continuous Operation: 3 - 10,
Short-Term Cleaning (30 min) 1 - 12
Maximum Feed Silt Density Index: SDI 5
Free Chlorine Tolerance: < 0.1 ppm
|
