8″ Housing – HSG,802P-3A, 3L, 32T-12-S-M
The design and fabrication of the sanitary membrane housing assembly has been inspected by a certified conformance examiner, has 3-A Symbol authorization by 3-A Sanitary Standards Inc., and approved by the USDA.
The 8″ 3A Sanitary housing assembly is a side entry 2-port design, with 2″ tri-clamp side ports, and 1½” tri- clamp permeate port. The exterior surface is a mill finish. The interior surfaces of the housing body and tri-clamp ports are mechanical polished (180-grit). Welds and edges are all polished to be smooth and tapered to eliminate the potential for any product hold-up. Maximum pressure rating is 600 psi.
Note: The end cap permeate bore ID size is 1.125″.
||Filter and Membrane Housing Parts
||The housing assembly includes:
(2) Stainless Steel 3A Sanitary Design End caps
ATD/LTD used with downstream end cap
Stainless Steel Mounting supports
Stainless Steel Support straps
3-A Symbol Authorization label
||Material Grade - 316
Increase from 2-inch to 3-inch Tri-Clamp Side Ports
Increase from 2-inch to 4-inch Tri-Clamp Side Ports
Add an additional 2-inch Tri-Clamp Side Port
Add an additional 3-inch Tri-Clamp Side Port
Add an additional 4-inch Tri-Clamp Side Port
Exterior Surface Finish -
Metallic Epoxy Paint
Electro-Polish (shiny, chrome appearance)
Mechanical Polish (180 Grit)