Description
The Hypure AF filter is a resin- bonded filter cartridge suitable for a wide range of applications. Hypure utilizes phenolic impregnated acrylic and polyester fibers for efficiency and long life. Uses for Hypure include adhesives, coatings, inks, and many more applications for both aqueous and solvent based fluids.
Features and Benefits
• High dirt holding capacity
• Wide range of micron retention
• Faster flow rates
• High efficiency
• Less change-outs
• Consistent quality
Applications
• Printing inks
• Water
• Hot, non-aqueous fluids
• Adhesives
• Antifreeze
• Insecticides
• Photo resists
• Solvents
• Paints and varnishes
• Thinners
• Fuels and Lubricating oils
• Coolants
• Coating
Specifications
Specifications
| Manufacturer |
Veolia |
| Series |
Hypure AF |
| Model Number |
HTN10-19 1/2 |
| Part Number |
3171857 |
| Description |
Type - HAF
Micron Rating (absolute) - 10 (10 μm)
Cartridge Length - 19½" (49.5 cm)
|
| Key Features |
Media - Phenolic impregnated acrylic and polyester fibers
Adapters - Nylon, Polypropylene
Outside Diameter 2 9/16” (65 mm)
Inside Diameter 1 1/8” (28.6 mm)
Available pore sizes 2, 5, 10, 15, 25, 50, 75, 100, 125, 150 µm
Available lengths 9 ¾" (24.8 cm) 29 ¼“ (74.3 cm) 10" (25.4 cm) 30" (76.2 cm) 19 ½” (49.5 m) 39" (99.1 cm) 20" (50.8 cm) 40" (101 cm)
Temperature - 250°F (121°C)
Flow rate - 5 gpm per 10 in. length or 18.9 lpm per 254 mm length
Forward pressure drops -
150 psid (10 bar) @ 70°F (21°C)
125 psid (8.6 bar) @ 100°F (38°C)
90 psid (6.2 bar) @ 150°F (65°C)
65 psid (4.5 bar) @ 180°F (82°C)
25 psid (1.7 bar) @ 250°F (121°C) |
