Manganese Greensand Filter – 95 GPM – GS-66

$0.00

We ship to
Please login or register to see downloads

Description

Manganese Greensand Filter with 95 Gallons per Minute (GPM) Continuous Service Flow Rate – GS-66

Specifications

Looking for downloads for this product? Follow the two simple steps below.

Step 1
LoginorCreate Account
Step 2

View downloads!

Specifications

Model Number GS-66
Part Number GS-66
Shipping Weight 11,500 lb
Key Features CWS MX-II electronic system controller
Timer initiated backwash cycle
Water activated diaphragm style control valves
NEMA-4X electrical enclosures (FRP)
Inlet/Outlet pressure gauges and sampling valves
Factory Hydro-tested at 100 psig
Inlet Operating Pressure 30 to 100 psig
AC Voltage 120 V
Electrical Phase 1
Frequency 60 Hz
Operating Temperature 35 to 110 ºF
Available Options Skid mounted, pre-piped, pre-wired systems
Differential pressure switch backwash cycle
Multiple tank parallel configurations
ASME code stamped resin tanks
Allen-Bradley PLC systems
PVC or CPVC exterior face-piping (PVC standard for filters with 6” service)
Copper or Stainless steel exterior face-piping
Stainless steel internal distributor piping
Seismic zone rated systems
Butterfly control valves (air operated; standard for filters with 6” service)
Air-scour backwash system
Steam / hot water sanitizable carbon filters
Alternate filter media (Birm, Filter-AG, Calcite)
Filter Type Manganese Greensand
Continuous Service Flow Rates 95 gpm
Peak Service Flow Rates 190 gpm
Back Wash Flow Rates 240 gpm
Service Pipe Size 3 in
Drain Pipe Size 4 in
Media Volume 60 ft³
Tank Diameter 66 in
Tank Length 60 in
Overall Length 67 in
Overall Width 82 in
Overall Height 105 in
Notes At expected pressure loss not exceeding 5 psig, based on a clean filter bedShipping weights are estimate only. Weights include resin and support gravel, which are added to the tanks after installation.Dimensions are estimate only. Actual dimensions may vary based on job-site space limits and piping layout. Allow a minimum of 24” above height dimension for resin loading. Use of ASME rated tanks may add up to 12” of tank height. Consult factory for dimensions on skid mounted systems.

Additional information

Weight 11500 lbs

Click To Schedule a Service Call

Click To Schedule a Sales Call

Call for a FREE Quote Today

(855) 787-4200