Dairy HWS elements utilize polysulfone parts and unique element construction to meet the requirements for hot water sanitization. Comprised of high quality materials that meet 3A standards and conform to guidelines set by the Code of Federal Regulations,
Dairy HWS elements feature a patented Durasan* Cage protective sleeve that enhances element integrity by securing the spiral. In addition, the sleeve improves sanitizing effectiveness by maintaining a controlled bypass between the element and pressure vessel wall
without the use of traditional brine seals.
The Dairy HWS elements comply with:
• FDA Regulations relevant sections of 21 CFR
• EU Framework 1935/2004/EC
• Halal & Kosher certification
Typical Operating Pressure: 200-500 psi (1,379-3,447 kPa)
Typical Operating Flux: 5-20 GFD (8–34 LMH)
Clean Water Flux RO: 14 GFD (24 LMH) @ 225 psi
NF: 14 GFD (24 LMH) @ 110 psi
Maximum Operating Pressure 600 psi (4,137 kPa) 41 – 122°F (26 – 50°C)
Maximum Temperature Continuous operation: 122°F (50°C)
Hot Water Sanitization: 194°F (90°C)
pH Range RO elements: 2.0 – 11.0
NF elements: 3.0 – 9.0
Chlorine Tolerance 500+ ppm hours,
dechlorination recommended
Maximum Pressure Drop Over an element: 15 psi (103 kPa)
Per housing: 60 psi (414 kPa)